
(I know the drain plug guard is on the wrong side, he messed up following directions) I ground it off and re-welded it on the correct side this morning.

Test fit before a little bit of trimming

(Welded my initials into it, on the rear "fold")

Orange base coats.

Flat black top coats. (Scratches should appear as orange, deeper gashes should be white.)
I didn't take a picture of it, But i reinforced the space between the oil pan and front "fold" by welding angle iron to the top side forming a triangle.
Took about 4 hours to move and re-weld the box, trim, and grind the edges, bend it, and paint it up.


