by bartonmd » Thu Apr 12, 2012 7:55 am
I wouldn't... You'd have to do different lift struts that I'm not sure exist in that length at the weight you'd need (you'll be more than doubling what they have to lift), and the hinges are designed for what the lift gate weighs + usually 10% margin, and you're talking about putting a 110% more weight on them. Plus, if you look at the forces, the hinge would also be put under double that stress when the thing is closed; because it not only is holding up the tire, but with the angles of the gas struts, they're also pushing down on the hinge double as hard as the stock ones were.
Mike