by Mudwheelin » Mon Jun 18, 2012 7:11 pm
With the radiator skid with the stock tow hook mod, like the pictures I sent you, the stock tow hooks don't mount to the bumper any more, so it will be a completely different answer than someont without one of my skids. They mount to the skid. So, it doesn't matter what you do to the bumper, and you are actually able to use the stock tow hooks... HOWEVER, the stock tow hooks use the stock bumper bolts to hold them on, so you'll either need to figure something else out on mounting the bumper, or you'll need to source some REALLY long metric bolts...
So if you lift the bumper cover up and don't cut it, the tow hooks will be right behind the plastic, 3" below where they were, stock. My suggestion would be to either cut out the bottom of the tow hook cutout in the bumper, or to do like some have done (Phil, maybe?) and cut where the green on Kyle's is, from in front of the wheels, around to and including the bottom of the tow hook hole.
Even if you cut 3" down, your still not going to be able to mount the tow hooks properly. The small bolt has no where to screw into. So it would be much better to fab up your own tow hook assembly rather then cutting your bumper. Or just forget all of that and order a skid from mike.
Markmc 2.5 lift, 2"Markmc body lift. Markmc 1.5 spacers, 33" Dynapro MT's, exhaust, EMT cams, CAI, Chipped, Light Bar. T.L. Guards
Build Thread:
viewtopic.php?f=25&t=2349