by v7guy » Fri Feb 12, 2016 2:31 am
I'm a bit torn on the airbox, while on one hand the box does protect it a fair amount from a lot of mud and dirt, it also does pull air from down at the bottom which is lower down than just an exposed filter... depending on the scenario I could see one setup being just as bad as the other. I suppose a solution is to leave it stock and don't try to imitate a hippo. lol
There were a lot of issues years ago when the MAF started getting placed more inline between the airbox and throttle body, I seem to remember it really popping up around the time the LS1 Transams were released, I'm sure there were other models that it was an issue on too. But given how close the air filter was to the MAF if the filter was over oiled it was supper easy to completely FUBAR the MAF readings... light application of oil seemed to be fine.
Obviously our concerns are a fair bit different and this is an apple to avocados comparison. But I guess what I'm getting at is if you're going to use a K&N or the like don't oil the filter so it's dripping like a $2 hooker and it really shouldn't be a problem.
All things in moderation, including moderation.
Some people never go crazy... what truly horrible lives they must lead