by navigator » Mon Nov 09, 2015 5:22 pm
The OEM bearings seem to fail a good bit slower than after market also. I remember when I replaced mine, I really couldn't tell with the bearing itself. I could drive straight until I heard the noise, then veer a little left or right and you could hear the noise change. Even with the stock bearing out it just felt like maybe the grease was a little thick. With my aftermarket you could tell they were worn by rotating in your hand.
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found