In 4HI, the transfer case is a good front-to-back locker. If you've seen my demo video of climbing a lumpy trail, when two wheels are intermittently off the ground and I'm teeter-tottering, you can see times when the rear locks up, and the FRONTS slow down their RPM.
If one of your fronts isn't breaking loose, there won't be enough RPM left to break loose one of the rears.
You will always get driveline binding at low speed. The locker isn't engaged, and some people think with an open front or rear diff this shouldn't happen, but it does because of the effective turning radii of the front and rear axles. I used to have to explain this all the time on Trailvoy, and this is one of my earliest Visio drawings for the platform.
