by navigator » Mon Apr 30, 2012 7:51 pm
I put in Z71 springs with a 3/4 spacer.
All I did was jack the rear up, put the frame on jackstands.
Remove the rear wheels.
disconnect the rear shocks
unhook the brake line anchor point so you get more play.
lower the rear end.
I then put the spacer on top of the spring and used a pry-bar to push everything in place.
I didn't disconnect the sway bar but I think that would have made it easier.
Reverse the order to put it all back together.
"Please consider a search before posting. Folks on this site PIONEERED functional offroad use of these trucks."
The answer to many common lift questions can be found hereMy Build Thread