Build thread 2.jpg
The first thing that needed to be done was to replace the trim above the rear glass. It was broken into many pieces and was leaking a small amount of water when it rained. I went down to the local boneyard and searched for the trim piece in decent shape. Well all of the Envoy's had been taken in the yard. I found one on a Trailblazer (same paint color as my Envoy but Envoy trim is black) but all of the mounting points were broken on the trim. Also I wasn't sure if the Trailblazer and Envoy had the same trim piece. Well I asked the junkyard guy how much he wanted and he just gave it to me since the mounts were broken and I wasn't sure if it would fit. Well I got it home and realized that it was wider than the Envoy trim. I cut the trim piece to size using the original as a template. Then I used a plastic epoxy to adhere the brass nuts back into the trim piece. After 12 hours of curing I bolted it back on and it is working great.
Build thread 3.jpg
Next I decided to pull the door trim and emblems off due to the door trim pulling from the door. I just used the ole fishing line trick and rubbed the excess mounting tape off with my finger (ouch). I tried goo gone, lacquer thinner and wax and grease remover but none of them would remove the tape. Some of them just made it melt and made it harder to get off. After I got everything removed I broke out the variable speed buffer and used 3M Perfect it II to buff out the paint since it felt like sandpaper. Most of the scratches on the paint were removed and there were some paint transfer marks from the previous owner on the bumper that almost all came out. Then I waxed and sealed the paint with Mother's products. I also painted the center caps of the wheels with some silver spray paint I had laying around that ended up matching the wheels pretty well. God I hate these wheels. Turned out pretty good for a 12 year old vehicle that has spent all of its life outside. I also spent quite some time taking the interior out and shampooing the carpet and seats because inside was pretty nasty. Inside turned out ok too.
Build thread 4.jpgStatistics: Posted by CHEVELLE598BB — Fri Jul 25, 2014 4:18 pm
]]>