A "little grinding" was necessary on the upper ball joints, I used a flapdisc instead of a traditional grinding wheel to keep the heat down so it did not cook the bearing.


New 265/75/16 Yokohama Geolander AT/S tires on!
Front

Rear

New rear height

No other modifications were needed!
First time off road with new larger tires.

I did buy an additional stock rim and mounted another new 265/75/16 tire to use as my spare and plan to rotate this onto the vehicle as I do normal tire rotations.
This larger spare tire did require me to cut the tire stop on the drivers side off flat.


The spare does barely clear the trailer wire harness

and just clears the panhardbar.

[edit: I recently cut the steel part even with the rubber in the panhard bar end bushings on the front sides and shimmed the bar forward with washers and now have 1/2" of clearance to the spare tire.]
Under side views.


Drivers side view.

Statistics: Posted by Beamer — Sun Feb 26, 2012 1:26 pm
]]>